Petsafe s402-855 manual

Bark Control. Cat Litter Boxes. Pet Fountains. Interactive Pet Toys. Travel, Access and Mobility. Trusted Support Call Customer Care for live help. Connect With Us. You can purchase additional receiver collars online or contact our Customer Care Centre.

Before making any changes to your system, remove the receiver collar from your existing pet s. When adding pets to new or existing electronic fence systems, check the boundary limits for each receiver collar separately before using on your pet and adjust the transmitter range as necessary. Yes, the receiver can be place on any non-metallic strap. Do not attach a lead to a collar that has a receiver on it. If it is a model with a stimulation level button, press and hold the button down for approximately 20 seconds.

For models without this button, take the battery out for about 1 minute or take it to the boundary and activate the collar until it no longer corrects. Make sure that the tab under the battery is lifted, if applicable. Millions of pets are comfortable while they wear stainless steel contacts. Here are some important steps for the health and comfort of your pet:. Pets should be at least 6 months old before you start training them to use a containment system. Plug the transmitter into another wall outlet.

When replacing batteries in your receiver collar, please make sure you insert the batteries while standing within 1. If using a receiver collar with multiple levels of stimulation, press and hold the stimulation level button until the LED diminishes before installing the new battery.

This is used to reprogram the receiver collar to the transmitter in the event of signal loss, for testing purposes to ensure the receiver and transmitter are communicating and in the event that the receiver collar is not responding as it should be. Remove all receiver collars from all pets before proceeding. If your receiver collar s does not respond, repeat steps 1 - 5. To get the normal boundary settings, dial the boundary control dial toward 8 until the desired boundary settings are established.

In addition, there are systems that use receiver collars which are specifically designed for small dogs, cats and stubborn dogs. Purchase an extra compatible receiver collar for each additional pet who will use the system.

Note that certain systems are not compatible and in-ground and wireless collars are not compatible. The static stimulation is safe and harmless. Containment systems are only effective on pets who wear the receiver collar.

Other animals can still enter your garden. Many of our collars and systems are compatible. Check your system for a list of compatible collars below. Note that wireless collars and transmitters aren't compatible with in-ground systems and collars. You can't add a wireless collar to an existing in-ground system, for example.

The flags should go just inside of the boundary zone, or along the wire for in-ground fences. To locate the boundary:. This can happen if the static stimulation level is too high. It is best to start on the lowest level of stimulation and increase the levels gradually. To solve your immediate issue, lower the static stimulation level and reassure your pet and offer praise.

If your pet remains fearful, suspend training and start again the next day. Make sure to end all training sessions on a positive note with lots of praise and play. All pets are different, so it's important to be patient with yourself and your pet. Some pets may understand the training quickly, and others may take more time.

Paying attention to your pet while you are going through the training and having patience will ensure you both enjoy years of freedom and safety. Goal The goal of phase 1 training is to familiarise your pet with the boundary flags, boundary, tone and stimulation. You will introduce your pet to the tone and the static stimulation and teach your pet where it happens. Training sessions should start at minutes, gradually increasing to over an hour. Your pet is ready for this step only when he clearly avoids the entire boundary flag line, regardless of any distractions or temptations.

During this step, do not leave your pet unattended. Goal To train your pet to stay within the pet area even with distractions outside of the pet area. Customer service is at the heart of everything we do. Privacy Statement Cookies Policy. Yes No. FAQs Training. FAQs Where do I place my wireless transmitter?

Choose a location for your transmitter that meets the following criteria: 0. Dry, well ventilated, protected area where temperatures do not drop below freezing. At least 1 metre away from large metal objects. Near a standard wall outlet. You may also choose to place your transmitter on a non-metal table or mount the unit on a wall. We recommend that you do not mount the transmitter until you have confirmed that you are pleased with the containment area the transmitter creates for your pet.

This is just in case you need to move or adjust the transmitter. After you have chosen the location for your transmitter, next: Plug your transmitter into a standard wall outlet. Turn the transmitter on. Adjust the boundary control knob to 8 and the boundary switch to high. Make sure the receiver collar battery is properly installed, the static stimulation level is set at 2 or greater, and the test light tool contacts are touching the contact points of the collar.

Hold the receiver collar down low and in front of you and walk out into your garden. When you hear the collar beep and the test light tool illuminates, this represents the boundary of the containment area. At this point, you may wish to install the boundary flags included with your system to help you get a visual of the boundary area. You will need the flags to begin training your dog as well.

You can use one of two methods to set up and check your boundary area. Note the boundary setting on the transmitter for future reference One-Person Method Measure the shortest distance from the desired boundary zone to the transmitter. Here are some important steps for the health and comfort of your pet: Proper fit of the collar is important. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. Can I bring this wireless fence with me when I travel?

Yes, you can! You can give your dog a secure area to play in wherever you travel together. There are a few things you need to keep in mind before you pack your bags: Place the transmitter indoors and plug it into an outlet.

Make sure the transmitter is at least 3 feet away from metal objects. Make sure you pack some boundary flags so your dog has a visual reminder of his new play area. Can I place the transmitter outside? Wireless transmitter with power adapter Receiver collar with RFAD battery Long contact points for long-haired dogs Test light tool Operating and training guide 50 boundary training flags.