Consult 2 scan tool

Timing Adjustment function allows users to adjust the base ignition timing. Active Test allows users to temporary modify some of the engine parameters for testing purposes. They return to their original values when a function is stopped, PC disconnected or engine restarted.

Likewise the engine may overheat if the Engine Temperature is set to low for a long period of time. Do not use those functions if you are not sure how they will effect your engine. Work Support functions allow users to perform some of the advance service procedures.

Those procedures may need to be performed after replacement parts are installed. Idle Air Volume Learn — is an operation to learn the fully closed position of the throttle valve. Initially all registered keys will be erased and all keys will need to be reregistered.

Cylinder Power Test function can be used to identify cylinder that is under performing. This function allows shutting down individual cylinders. If all of the cylinders are producing the same amount of power the engine RPMs will drop exactly the same amount on each cylinder that is cancelled. Log Analyser is used to review log files previously generated by with Data Logging function. Graphs are drawn by selecting boxes next to parameter value.

Graph colours match the parameter value colours. Predefined or user specific tests can be used. Note: This function should not be used while driving on public roads. Address Watch function is used for monitor specific ECU memory addresses. By monitoring a memory address extra information can be retrieved that is not normally available using Consult II protocol. A knock sensor reading can be obtain using this method if knock sensor memory address is known. A second serial port is used to connect to the controller and collect data.

The data from the wideband meter can be displayed or logged in conjunction with other engine parameters using the Data Logging function. Basic Functions can be selected by clicking on the buttons or using the Menu bar.

All functions are disabled until communication with the ECU is successfully established. This software does not support diagnostics over the DDL1 line. Some of those models are: X-trail, Maxima, Patrol. Self Diagnostics function allows users to read and reset BCM error codes.

Active Test allows users to temporally activate some of the functions of the BCM. This is usually used to manually test the functionality of the systems controlled by the BCM. Note: Functions not supported by the BCM are disabled grayed out. This function can also be accessed from the Data Display window so the data can be logged while it is displayed.

The data log file can be analysed using the Data Replay or Data Analyser functions. Self Diagnostics function allows users to read and reset TCM error codes. Self Diagnostics function allows users to read and reset ABS error codes.

The CONSULT-III is specifically designed to address these complex and advanced in-vehicle electronic devices, enabling accurate diagnosis and repairs and shortening waiting times for customers. The basic diagnostic system is composed of the main unit i.

Through a wireless LAN, this diagnostic system can be connected to the Nissan network in Japan, enabling the dealerships to retrieve information from various sources and display service technology data on the laptop PC.

Swift diagnosis and swift repairs through automated operations The selection of CAN type as well as the identification of malfunction locations are completely automated, allowing CAN diagnosis to be done 17 times faster than previous method where the diagnostics system needed to be supplemented by the service manuals.

Repairs involving reprogramming of the in-vehicle computer can be completed 1. Automated Self-Diagnostics The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. Capable of handling multiple complex defects The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.

Enhanced data management with improved laptop PC. New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management.

Map data update function for hard-disk navigation system Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system hard-disk equipped in the all-new Skyline and other future products.